Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

Wolf Tooth Components GoatLink
$29.95
Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain. - Optimized for using a Shimano XT 8000 or XTR 9000 Rear Derailleur with a 10-42, 10-44, 11-45, 11-46 rear cassette setup - Compatible with M8000 (XT) and M9000 (XTR) series eleven-speed Shimano rear derailleurs - Double chainrings are not currently supported - Triple chainrings are not supported - Direct Mount-native frames and SRAM derailleurs are not supported
Wolf Tooth Components Roadlink
$24.99
The RoadLink is a simple device that offsets the position of your Shimano road derailleur to make it possible to run a wide-range mountain bike style cassette. It is an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes - 11-42 or 10-42 setups are not supported - Works with all 10-11 speed Shimano and SRAM Road Derailleurs - Best used with Single or Double Setups - see manufacturer's site for more details
Wolf Tooth Components Roadlink Direct Mount
$29.99
The RoadLink DM (Direct Mount) is the RoadLink designed to fit Shimano’s current generation R8000 Ultegra and R9100 Dura-Ace rear derailleurs. It serves as a simple device to offset the position of the rear derailleur, making it possible to run a wide-range mountain bike style cassette. It’s an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - Fits Shimano R9100-generation Dura-Ace and R8000-generation Ultegra rear derailleurs - CNC machined from 6061-T6 aluminum with stainless steel bolt - Does not change the derailleurs total chain wrap capacity - Fits standard derailleur hangers only - Best used with Single or Double Setups - see manufacturer's site for more details
Wolf Tooth Components Ultralight Stem Cap With Integrated Spacer
$9.95
This stem cap is where your bike fashion sense and the weight weenie in you collide. This Ultralight and ultra-sleek stem cap integrates a 5mm, 10mm or 15mm headset spacer with your stem cap in finely machined piece. Why have extra steerer tube requiring spacers on top of your stem you ask? Well, many carbon steerers require that the steer tube extend above the stem. Also, riders may want the flexibility to move handlebar height up and down for different types of riding or for bike re-sale. - Design and manufactured in Minneapolis, MN USA - 1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only - 6061-T6 aluminum - 5mm internal cylinder wall height - Black aluminum bolt included Total weight (cap + bolt): 5mm= 12g. Compare to a standard flat stem cap and steel bolt at 20 grams + spacers add even more.
Whisky Parts Co. Top Cap Compression Plug
$19.95
The Whisky compression plug for carbon forks is reliable and easy to use. The simple design offers excellent support and function, works great with Whisky carbon forks, and may fit other manufacturer's forks as well.
Wheels Manufacturing Inc. BB86 to 30mm ABEC-3 Sealed Bearing
$69.53
Expand your choice of cranks for use in frames with 41mm ID shells. Replace your bottom bracket with these dual-row flanged bearings and run 30mm spindle cranks in your frame. These bearings fit directly in frames with 41mm ID bottom bracket shells. Crankset spindle length must be longer than 104mm when used in a 86.5mm wide BB shell. - Sold individually (two needed per frame) - Bearings: Enduro Dual-Row ABEC-3 - Color: Silver - Bottom Bracket/Frame Interface: BB86, BB92, PF90, BB104/107, PF121, PF132 - Bottom Bracket Shell Width: 86.5mm – 132mm - Bottom Bracket Shell I.D.: 41mm - Flange OD: 42mm - Crank Spindle Diameter: 30mm - Over Bearing Width: 92mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Weight: 36g
Wheels Manufacturing Inc. Chainstay Protector
$6.95
Wheels Manufacturing Clear Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay.
Wheels Manufacturing Inc. Derailleur Hanger 144
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x10 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 172
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M6 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 176
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 19
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 27
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 298
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M5x8 socket head screw included
Wheels Manufacturing Inc. Derailleur Hanger 318
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - For Stranglehold Dropouts - Replaces Trek Part #W504671
Wheels Manufacturing Inc. Derailleur Hanger 6
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Enduro 24x37 Sealed Bearings
$23.00
Enduro 24x37 ceramic hybrid sealed bearing for 24mm crank spindle applications. Direct OEM replacement for most BB86/92, Trek BB90/95, and with all Wheels Mfg. PF30 outboard, BB30 outboard, and BSA threaded bottom brackets. - Dimensions: OD: 37mm / ID: 24mm / Width: 7mm - Imported - Sold individually (Requires two to service both sides of bottom bracket)
Wheels Manufacturing Inc. Enduro 6806/29 (DUB Compatible) ABEC-3 Sealed Bearings, Bag of 2
$55.17
Replacement Enduro 6806/29 ABEC-3 sealed bearings for Wheels Mfg DUB Compatible bottom brackets. - Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - ABEC-3 - Grade 10, 5/32" chromium steel balls - Kyodo Yushi SRL grease or equivalent - Imported - Sold as Bag of 2
Wheels Manufacturing Inc. Enduro GXP 22x37x8 Sealed Bearing
$20.00
Enduro angular contact sealed bearing for GXP non-drive-side bottom bracket cups. The inner race extends and matches the stepped down end of the GXP crank spindle. Direct OEM replacement for most BB86/92, Trek BB90/95, and compatible with all Wheels Mfg. PF30 outboard and BB30 outboard bottom brackets. - Dimensions: OD: 37mm / ID: 22mm / Width: 8mm - Install with inner race extension facing inwards - Imported - Sold individually
TRP Front Flat Mount Adapter
$12.99
Flat mount front adapter for both 140mm or 160mm rotors. All mounting hardware included in package.
TRP Rear Flat Mount Adapter
$12.99
Flat mount rear adapter for a 160mm rotor
Syntace X-12 Derailleur Hanger And Parts
$16.50
- Syntace x-12 Derailleur hangers and screws are only compatible with frames that have Syntace x-12 Dropouts.
Shimano Deore XT M8000 Rear Derailleur Pulley Set
$19.00
Shimano Rear Derailleur Pulley Assemblies
Shimano Deore XT M8000 Shift Pod Cable Adjusting Unit
$3.00
Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit
Salsa Cane Creek +3mm 40mm Lower Race Custom for Salsa
$12.00
Custom Cane Creek lower race for Salsa.
SRAM Bottom Bracket Adaptor
$38.00
SRAM PressFit 30/English Bottom Bracket Adaptor allows conventional threaded bottom brackets to be installed in a PF30 frame. - Not to be used with internal threaded bottom brackets; compatible with BBs that use two external cups
SRAM Flat Mount Disc Brake Adaptor
$18.00
Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts
SRAM Guide Ultimate Hose Kit
$45.00
Original equipment hydraulic hoses for no-compromise brake performance. - Fits All B (2016+) Versions of Guide RSC RS R - Hose length: 2000mm
SRAM PowerLock Eagle Chain Connector 12-Speed
$4.25
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
SRAM Steel Chainring Bolt Kit
$7.00
- Length: 8 mm, 5.5 mm - Material: Steel - Type: Hex - Set of 4 x 2
SRAM X-Sync Pulley Assembly
$44.00
Original equipment rear derailleur pulleys for SRAM rear derailleurs. Fits X01, X01DH, X1, GX 1x11, NX, Force CX1, Force 1, Rival 1, Apex 1 Derailleurs. - Wide-narrow pulley tooth profile holds the chain better - Stainless steel sealed cartridge bearings
Page 1 of 3 Next page