Accessories

- RockShox, 11.4118.038.000, Service kit, Monarch B1RL C1 R, RT, RT32014+

- RockShox, 11.4118.038.002, Service kit, Monarch Plus B1 2014+

Factory service kits for Reba A7 forks

200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) - Recon Gold RL A4 (2018+)

200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) - Recon RL/TK A1 (2018+)

RockShox 30mm Seal Kit

RockShox Volume Reducer Kits

200 HOUR/1 YEAR SERVICE KIT (INCLUDES AIR CAN SEALS, PISTON SEAL, GLIDE RINGS, IFP SEALS, SEAL GREASE/OIL) - SIDLUXE A1 (2020)

50 Hour Service Kit (Includes Air Can Seals, Piston Seal, Glide Rings) - Sidluxe A1 (2020)

200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) - Recon RL/TK A1 (2018+)

- 200 hour / 1 year service kit for Super Deluxe RT3 A1 rear shocks - Includes air can seals, piston seal, glide rings, IFP seals, reservoir seals

RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.

- Trek Reaktiv Thru Shaft 200 hour service kit

200 HOUR/1 YEAR SERVICE KIT (INCLUDES DUST SEALS, FOAM RINGS, O-RINGS, CHRC SEALHEAD, DB C1 SEALHEAD) - YARI CHRC B1+ /REVELATION CHRC A1+, PIKE B3+/ LYRIK C2+ SELECT

Rock-N-Roll Absolute Dry lubricant is a super-clean chain lube that picks up little or no dirt. - For road bikes only

- Makes braking and shifting super smooth by reducing the drag in cable housings - Law prohibits ORM-D materials from shipping by air

Rock-N-Roll Extreme is a very clean lubricant due to its ability to shed dirt and dust. - For mountain bike or wet road riding

Rock-N-Roll Gold lubricant is for both mountain and road bike use. The formulation goes deep down into the chain and traps any dirt. Then, with the energy of the chain freewheeling backwards, the dirt and grit floats to the surface so you can wipe it all off, leaving a new and clean application of lube inside the chain, where it's needed. - All-purpose lube - Cleans and lubricates simultaneously

- Premium red formula all-purpose bicycle grease

- Premium white grease - Great for bearings and overhauls

Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

When speed matters, our Breakaway Insulated Bolt bottle delivers a burst of cool hydration quickly. Just grab, squeeze, and drink up without splatter. Engineered to keep liquids cool to the last drop. As cycling enthusiasts, we know a thing or two about power sprints, brutal hills, and relishing the downhill ride. We also know there's nothing better than taking a big swig of cold water, hours after it's poured. So, we built the Breakaway® Insulated bottle for road warriors like us—those who sweat hard, hydrate harder, and demand replenishment. Your liquids will stay cool twice as long, thanks to the Tri-Layer™ insulation and radiant heat reflective technology. Plus, we've re-engineered it to lighten your ride while still delivering simple hydration. The compact and durable design fits most bike cages and includes a high-flow, self-sealing Surge Cap™ for spill-proof transport.

Built for the all-terrain rider, the Breakaway Muck Insulated bottle keeps you hydrated when you're going hard. Dirt doesn't stand a chance. Designed for mountain bikers, gravel grinders, and all weather roadies, the Breakaway Muck Insulated water bottle features a Muckguard™ cap cover that protects the Surge™ valve from whatever the trail dishes up. The high-flow Surge Cap provides a sip or blast of water and self-seals to eliminate spills and splatter, even on your bumpiest rides. Tri-Layer™ insulation and radiant heat reflective technology keep your liquids cool twice as long, so you can stay cool on long and dusty days in the saddle. Available in three sizes, including a new 12oz volume - which fits any frame size and/or full suspension bike with limited real estate for bottles. Full Features: - The Muckguard protects Surge™ Valve from whatever the trail dishes up. Designed for mountain bikers, gravel grinders, and all weather roadies. Opens and closes with one hand - seals valve when closed. - The Breakaway Surge valve maximizes flow rate and self-seals to eliminate spills and splatter. It's spill-proof when open, and pushes closed for leak-proof transport. - The original, 100% BPA-free insulated water bottle. The updated design features triple wall insulation, keeping your liquid cooler 2X longer. - Our bottles are designed with ultra-light materials and a unique grip groove, so you can hydrate with an easy squeeze. - Made for cyclists by cyclists, the Breakaway series fits securely in a variety of bottle cages. The updated Polar Bottle shape has a unique grip groove and wall design for effortless hydration. - The innovative Surge Cap is two pieces–cap and valve–and easy to clean. Simply twist, pull, and wash. Plus, they're dishwasher safe. - Polar Bottle insulated water bottles are crafted in Colorado to reduce environmental impact and support local economies. Designed to last, each one of our water bottles comes with a lifetime guarantee.

Built for the all-terrain rider, the Breakaway Muck Insulated bottle keeps you hydrated when you're going hard. Dirt doesn't stand a chance. Designed for mountain bikers, gravel grinders, and all-weather roadies, the Breakaway Muck Insulated water bottle features a Muckguard™ cap cover that protects the Surge™ valve from whatever the trail dishes up. The high-flow Surge Cap provides a sip or blast of water and self-seals to eliminate spills and splatter, even on your bumpiest rides. Tri-Layer™ insulation and radiant heat reflective technology keep your liquids cool twice as long, so you can stay cool on long and dusty days in the saddle. Available in three sizes, including a new 12oz volume - which fits any frame size and/or full suspension bike with limited real estate for bottles. Full Features: - The Muckguard protects Surge™ Valve from whatever the trail dishes up. Designed for mountain bikers, gravel grinders, and all weather roadies. Opens and closes with one hand - seals valve when closed. - The Breakaway Surge valve maximizes flow rate and self-seals to eliminate spills and splatter. It's spill-proof when open, and pushes closed for leak-proof transport. - The original, 100% BPA-free insulated water bottle. The updated design features triple wall insulation, keeping your liquid cooler 2X longer. - Our bottles are designed with ultra-light materials and a unique grip groove, so you can hydrate with an easy squeeze. - Made for cyclists by cyclists, the Breakaway series fits securely in a variety of bottle cages. The updated Polar Bottle shape has a unique grip groove and wall design for effortless hydration. - The innovative Surge Cap is two pieces–cap and valve–and easy to clean. Simply twist, pull, and wash. Plus, they're dishwasher safe. - Polar Bottle insulated water bottles are crafted in Colorado to reduce environmental impact and support local economies. Designed to last, each one of our water bottles comes with a lifetime guarantee.

- Rugged 6061 aluminum construction is corrosion resistant - 100mm mudflaps provide ultimate coverage and are double-riveted for durability - Hardware is all stainless-steel and pre-installed for hassle-free mounting - V-stays for added stability - Disc brake compatible - 50mm width - Release Tabs on front fender for added safety - Meets EN test standards

Turn your bike into an all-weather vehicle with Planet Bike's Cascadia ALX Fenders. Made of unbreakable corrosion-resistant 6061 aluminum with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection plus release tabs on the front fender for easy on/off. The hardware's even pre-installed for quick mounting.

Compatible with Eco Rack - Extra long replacement stays for Eco rack - Length: 15.5"

Planet Bike's Eco Rack is made of oversize tubular 6061-aluminum for maximum strength and stability. It's designed to provide complete heel clearance when you install packs. And, the pre-installed rack hardware makes it a cinch to mount the Eco Rack to your bike, too. This rack fits most road, mountain and hybrid bicycles and even includes a built-in platform, which doubles as a mini-fender on rainy rides.

With a dazzlingly bright 28 LED PB Power Array and three modes, this USB rechargeable light is like a Scarlet Begonia for the back of your bike. For added safety, it has a CPSC certified reflector in the lens to keep you visible when the light is off. Versatile mounting options allow you to attach it to your seat post or rear rack with the included brackets. - PB 28 LED power array and CPSC certified reflector provides steady, Courtesy & Superflash modes - FL1 Tested - Run times: 5 hrs (steady – 20 lm), 9 hrs (Courtesy – 6-18 lm) and up to 30 hrs (Superflash - 20 lm) - Provide 160-degrees of visibility - Highly visible, even in daylight - Dust and water resistance rated to IP65 standard - 700 mAh lithium polymer battery charges in 2.5 hours with micro USB cable (included) - Includes rear rack and seat post mounts plus clip mount for multiple mounting options - 65 grams

You'll keep on keepin' on with Planet Bike's K.O.K.O. Cargo Rack on your bike. Made of 6061 aluminum for maximum strength and stability, it boasts a wide range of adjustability so it's easy to install and fits most bicycles. There's a taillight mount, too (lights sold separately).

Planet Bike's PB Cage holds your bottle securely with sturdy 6.2mm-diameter 6061-aluminum tubing and comes in a variety of colors so you can coordinate your bike down to the last detail.

The Protege 9.0 uses the Planet Bike 4-line MacroMonitor display and has digital wireless technology to eliminate messy wires. - Functions: Current Speed - Speed Comparator - Ride Time - Trip Distance - Dual Odometer (for 2 wheel sizes) - Average Speed - Maximum Speed - Clock - Temperature - Digital technology results in decreased interference - Easy-to-adjust sensor that fits bladed spokes up to 4 mm - 4-Line MacroMonitor LCD displays up to 5 pieces of data at a glance - Fits 25.0-31.8mm handlebars - 21" wireless range

Deluxe steel floor pump – Metallic Grey Make sure you ride in comfort with the correct tire pressure. Planet Bike's redesigned STX floor pump has a big 3" integrated gauge and the Auto Head fits both Presta and Schrader valves. It’s engineered for smooth and efficient inflation. - Rugged steel barrel, plunger, and base - Anatomically designed handle for comfortable air compression - Auto Head fits both Presta and Schrader valves - Oversized 3 inch 160 psi dial gauge - Pressure rated to 200 psi - Needles included for pumping up sports balls - Large steel base for stability - Rebuildable - Height: 27”

Planet Bike's Sideload Cage is perfect for smaller frames and compact geometry. This cold-forged aluminum cage loads from the right on downtubes and the left on seat tubes. And, it's only 41 grams!

The 65R is the Superflash tail light on steroids. The Cree XBD LED delivers 65 lumens of brilliance and 220° of visibility to get you noticed day and night. - Cree XBD and high output surface mounted LEDs provide 65 lumen output with high, low, Courtesy and Superflash modes - FL1 Tested - Run times: 7 hrs (high – 30 lm), 12 hrs (low – 7 lm), 5.5 hrs (Courtesy - 13-40 lm) and up to 11.5 hrs (Superflash - 65 lm) - Provides 220° of visibility - Highly visible, even in daylight - Dust & water resistance rated to IP65 standard - 550 mAh lithium polymer battery charges in 2.5 hours with micro USB cable (included) - Smart Charging Technology with built-in low battery indicator - Includes Quick Strap seat post mount - 52 grams

Planet Bike's Versa Rack means your steed with disc brakes can finally be made into a rack-packing workhorse. It's 6061-aluminum construction provides maximum strength and stability. Thanks to the clever design you'll have complete heel clearance when you install packs. Plus, the pre-installed rack hardware makes it a cinch to mount the Versa Rack to your bike.

- Prevents rust, repels water - Extra heavy duty, nothing finer - Has achieved the Premium lubricant classification by all major bearing manufacturers worldwide

- Holds socket tool to BB axle to eliminate slippage during removal and installation. New spring preload allows increased flexibility and rotation during use. - New design works with square taper and splined axles with M8, M12, or M15 internal spindle thread. - Made from heat-treated tool steel for the ultimate in strength and lasting performance. - Use with Pedro's Splined Bottom Bracket Socket. Compatible with Pedro's Pro Socket Handle. If you have ever battled with an over-tightened Shimano and ISIS Drive splined bottom bracket cup, you know why Pedro's created the BB Socket Holder. Though these types of bottom brackets proved themselves as the standard for many years and continue to be found on many bikes, the tendency for their shallow splines to slip during removal or installation has resulted in more than a few expletives, high frustration levels, and worst of all, injuries. The Pedro's BB Socket Holder II provides a simple, shop-quality tool that solves this problem. The new design works on bottom brackets spindles with M8, M12, or M15 threads and adds spring preload for increased flexibility and rotation during use. Backed by Pedro's lifetime warranty.

- Made from heat-treated tool steel. - New design includes two tip inserts and fits all cranks using 22mm x 1 threads with square taper or splined bottom bracket spindles. - Precision tolerances provide perfect fit and floating tip design ensures easy crank removal. - Works with any 15mm wrench like Pedro's Ratcheting Combo Wrench or pedal wrenches. Pedro's new Compact Crank Remover provides the professional quality, precision fit tool required to properly remove press fit square taper or splined cranks. The Crank Remover is made from heat-treated tool steel for the ultimate in strength and lasting performance and features a floating tip design for easy crank removal. New design includes two tip inserts and fits all cranks using 22mm x 1 threads with square taper or splined bottom bracket spindles. Works with any 15mm wrench like Pedro's Ratcheting Combo Wrench, Equalizer Pedal Wrench, or 15mm Pedal Wrench. Backed by Pedro's lifetime warranty.

- Ultra concentrated! Just one 16oz bottle of 16X Concentrate will make SIXTEEN 16oz bottles of Green Fizz bike wash! - Advanced plant-derived surfactants quickly remove tough dirt and grime from the whole bike. - Use on the whole bike without risk of damage or washing away grease/lube from critical parts. - Safe, biodegradable, phosphate-free, solvent-free, plant-derived, and zero-VOC. Green Fizz 16X Concentrate is a game-changer. Its the same incredible bike wash, only in ultra concentrated form! Just one 16oz bottle of 16X Concentrate will make SIXTEEN 16oz bottles of Green Fizz bike wash! So what is the big deal? It's all about re-using that perfectly good spray bottle you already own, reducing energy use, and saving money! Using Green Fizz 16X Concentrate drastically reduces packaging, shipping cost, and removes 14 plastic bottles from the waste stream. If that is not already reason enough, Green Fizz 16X Concentrate is an incredible value and allows you to boost strength for tough jobs or dilute further for even more economy. The improved Green Fizz bike wash safely, naturally, & effectively removes tough dirt & grime from the whole bike. Developed specifically for bicycle washing, Green Fizz can safely be used on any material without risk of damage or washing away grease/lube from critical parts. The pre-activated, biodegradable formula uses advanced plant-derived surfactants and incredible foaming action to reach surfaces and loosen dirt allowing it to be easily wiped or rinsed away leaving your bike looking like new. Free of harsh chemicals, gentle enough to use on any material, fully biodegradable, phosphate-free, solvent-free, plant-derived, and zero-VOC.

- Unique citrus-based solvent/surfactant blend quickly dissolves away grease and grime. - Low surface tension allows superior penetration for complete degreasing. - Biodegradable, water-soluble formula easily rinses away. Oranj Peelz has quickly and effectively degreased drivetrains for more than twenty years using a unique citrus-based solvent/surfactant blend. Designed specifically for bicycle drivetrain degreasing, the powerful, biodegradable formula penetrates into every surface and quickly loosens and dissolves even the toughest drivetrain grime. The water soluble formula rinses easily leaving surfaces residue-free.

- Innovative chain retention hook locks tool onto cassette, ensuring full chain wrap and eliminating slippage. - Tool geometry offers maximum effective leverage and compact 270mm length. - Compatible with all multi-gear cassettes including 12-Speed. Chain retention hook fits cogs up to 18 teeth. - Integrated fixed gear lockring wrench optimized for 41-42mm OD lockrings. Pedro's new Pro Chain Whip takes inspiration from our beloved Vise Whip, applying many of the same functional principles to a more traditional chain whip design. The Pro Chain Whip design focuses on functionality, practicality, and safety. The innovative chain retention hook offers multiple benefits. First it keeps the chain secured to the tool during storage. Secondly, it improves user safety by locking the tool onto the cassette, ensuring full chain wrap and eliminating slippage. An added bonus of this feature is that the tool stays in place on its own. No more fumbling with your cassette lockring tool with one hand while trying to keep your chain whip in place. Being attached to the cassette, the Pro Chain Whip can also be used to slide the cassette off the hub. A nice option when dealing with grimy gears. Keeping traveling mechanics and portability in mind, the Pro Chain Whip geometry maximizes effective leverage while keeping the tool length to a compact 270mm and 225g weight. The integrated fixed gear lockring wrench, optimized for 41-42mm OD lockrings, adds versatility and is one less tool to carry. The Pro Chain Whip is compatible with all multi-gear cassettes including 12-speed, and the chain retention hook fits cogs up to 18 teeth.

- 8-function fixed-gear multi-tool. - Made from 5mm thick heat-treated tool steel for strength and lasting performance. - Mounts to frame's bottle cage mount with included wing bolts. - 187mm (7.4in) length and ergonomic shape provide excellent leverage and comfort. - Features 4mm/5mm hex, 8, 9, 10, and 15mm box end wrenches, lockring wrench, and bottle opener. Even in dense cities, riders often find themselves far away from home or a bike shop. Having the right multi-tool can be the difference between reaching your destination on time or taking the longest walk of your life carrying a busted bike. Pedro's has drawn upon its experience making professional shop tools to design the Trixie, the ultimate multi-tool for the fixed-gear urban rider. Pedro's Trixie is laser cut from 5mm thick heat-treated tool steel for the ultimate in strength and lasting performance. The tool's 187mm (7.4in) length and ergonomic shape provide outstanding leverage and comfort. Best of all, the Trixie mounts to your water bottle mounts with included wing nuts ensuring you always have your tool when you need it. The Trixie features a 4mm/5mm hex bit in a rubber holder, 8, 9, 10, and 15mm box end wrenches, lockring wrench, and bottle opener, all backed by Pedro's lifetime warranty.

- Updated jaws work on track cogs, cog & bb lockrings, e-bike chainrings, and cassettes. - Updated adjustment knob features gear size indication for quick reference of the current tool setting. - Adjustable plier design securely locks in place ensuring positive engagement and preventing slippage. - Fits 9-23 tooth gear sizes and 40-46mm OD lockrings with opposing notches. Compatible with all multi-gear cassettes and all standard width cogs and e-bike chainrings. Visit pedros.com/chainfit for the latest compatibility information. The Vise Whip is simply a better solution for holding your cassette during removal and now also works on track cogs, cog & bb lockrings, and e-bike chainrings. This innovative tool was developed by Pedro's in close collaboration with legendary frame builder and cycling technical author Lennard Zinn. The Vise Whip is beautifully simple to use. Once you try it, you'll never go back to a chain whip again.

Shop-quality, adjustable torque driver that limits torque applied to fasteners, preventing over-tightening and damage to lightweight components. The ATD-1.2 features all-metal internal construction with a comfortable, ergonomic composite molded grip. Each tool is assembled and calibrated at Park Tool's factory in Minnesota.

The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.

Precision CNC machined aluminum tool for the installation and removal of 16-notch external bearing bottom brackets. Anodized for easy identification and featuring a ratchet/torque wrench compatible 3/8" drive. - 16 notch 49mm OD cup - Fits FSA MegaEvo, Wheels PF30, and more

Precision CNC machined aluminum tool for the installation and removal of 16-notch external bearing bottom brackets. Anodized for easy identification and featuring a ratchet/torque wrench compatible 3/8-inch drive. - 16 notch 49mm OD cup - Fits FSA MegaEvo and more

A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 12-notch tool fittings, including Chris King ThreadFit T47 & ThreadFit 30 bottom brackets. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. Fits 12-notch bottom bracket tool fittings with a major diameter of 50–53 mm and a minor diameter of 48.2 mm, including: - BBInfinite T47 - Chris King ThreadFit T47 - Chris King ThreadFit 30 - Enduro BBRight Torqtite - Hambini T47 - Rotor T47 External 30mm - Rotor BBright, BB30, BB386EVO, and PF30 thread-together

A precision CNC-machined aluminum tool for the installation and removal of select components with 16-notch tool fittings, including bottom brackets, center lock disc brakes, and e-bike motor lockrings. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. The BBT-69.4 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage. Fits 16-notch tool fittings with a major diameter (outside of notches) of 44–45 mm and a minor diameter (inside of notches) of 42.7 mm, including: - Shimano BB80, BB5700, XT BB70, BB51, and previous external bearing threaded bottom bracket cups - Threaded bottom bracket cups from Campagnolo, Chris King, FSA MegaExo, Hope, SRAM/Truvativ GXP, Race Face X-type, Surly, Wheels, Fulcrum, and others - Center lock disc brake rotor lockrings - Bafang BBSH, BBS02 mid-drive motor lockrings - 3/8" drive fitting

A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 12-notch tool fittings, including SRAM BSA DUB, Race Face Cinch, Rotor BSA30, and others. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. The BBT-79.3 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage. Fits 12-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 45–47 mm and a minor diameter (inside of notches) of 44 mm, including: - SRAM BSA DUB - Race Face Cinch - Rotor BSA30 - Zipp Vuma - Hawk Racing BB3086 - and more - 3/8" drive fitting

The CC-4 is a drop-in style gauge that measures bicycle chain wear. The laser cut CC-4 accurately measures a long section of chain and strategically comes in contact with the chain in three places, quickly and easily taking the guesswork out of knowing when chain replacement is necessary. A worn chain will cause poor shifting as well as accelerate drivetrain wear. The tool works on any 5 to 12-speed derailleur chain (including SRAM AXS) and is designed to accurately indicate when a chain reaches .5% and .75% wear, the points at which most chain manufacturers suggest replacement.

A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. The Chain Gang includes: - CM-5.3 Cyclone Chain Scrubber - GSC-1 GearClean Brush - 8 oz. bottle of Bio ChainBrite The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.

A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf

Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut

The Park Tool FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs. -Utilizes a 12mm guide pin to stabilize the tool during use - Fits 12-spline cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter) - Fits some Shimano and similar disc brake rotor lockrings

Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool

A worn chain shifts poorly and wears sprockets at an accelerated rate. Park Tool's Chain-Wear Indicator is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.

Park's Deluxe Home Mechanic Repair Stand is an awesome portable stand that's as useful while traveling as it is at home. This versatile stand features Park's shop-quality Micro-Adjust Clamp that handles round and aero seatposts and frames from 7/8-inch to 3-inches in diameter and clamps securely with its quick-release cam and handle that fine-tunes the tension. The clamp also has protective rubber jaws and built-in slots for cables. Plus its jaws are only 2.7 inches tall so they easily fit in narrow areas, like on seatposts that aren't raised much. The Deluxe Stand also boasts a stable base and the top telescopes for putting the bicycle right where you need it to get your work done efficiently. Plus, you can also rotate bicycles 360 degrees and the stand folds for easy carrying and storage.

The Park FR-6 Freewheel Remover fits most 4-notch BMX and singlespeed freewheels. It can be held with a wrench or vise and its narrow profile allows use without removal of cones and locknuts.